Does exposure to polymethyl methacrylate bone cement increase the risk of surgical glove failure?

INTRODUCTION: Surgical glove perforation has been linked to a double-fold increased risk of surgical site infection. Infection in the context of arthroplasty can have devastating consequences. In orthopaedics, use of polymethyl methacrylate (PMMA) bone cement is commonplace, and the impact on glove strength and perforation risk is not fully understood. This study aimed to examine the resistance to perforation and thickness of gloves following PMMA exposure, in accordance with the International Organization for Standardization (ISO) standard for glove integrity. METHODS: Pairs of gloves were separated and randomly sorted into exposure and control groups. Twenty pairs of latex and 40 pairs of polyisoprene gloves were used. Exposure group glove cuffs were in contact with cement from a single surface of the glove for 13 min as cement cured. Force to perforation and glove thickness were tested in accordance with ISO guidelines. RESULTS: Latex gloves were found to have a significantly increased force to perforation following PMMA exposure (10.26 Newtons (N) vs. 9.81 N, P = 0.048). Both polyisoprene under- and over-gloves were shown to have no significant change in strength to perforation post exposure (9.69 N vs. 9.83 N, P = 0.561, and 10.26 N vs. 10.65 N, P = 0.168, respectively). All groups were over the ISO standard minimum strength of 5 N. CONCLUSIONS: Exposure of latex and polyisoprene surgical gloves to PMMA bone cement does not appear to increase glove perforation risk and rather may improve natural rubber latex glove strength. This study supports the use of latex and polyisoprene surgical gloves in procedures that involve the handling of PMMA bone cement.

LncRNA MSTRG.22719.16 mediates the reduction of enoxaparin sodium high-viscosity bone cement-induced thrombosis by targeting the ocu-miR-326-5p/CD40 axis.

OBJECTIVE: Polymethylmethacrylate (PMMA) bone cement promotes the development of local thrombi. Our study found that a novel material, ES-PMMA bone cement, can reduce local thrombosis. We used a simple and reproducible animal model to confirm the reduction in local thrombosis and explored the associated molecular mechanism. METHODS: New Zealand rabbits, which were used to model thrombosis using extracorporeal carotid artery shunts, were divided into the following two groups, with 3 rabbits in each group: the PMMA bone cement group and the ES-PMMA bone cement group. Four hours after modelling, experimental samples, including thrombotic and vascular tissues, were collected. Thrombotic samples from the PMMA group and ES-PMMA group were subjected to lncRNA sequencing, and a lncRNA microarray was used to screen the differentially expressed lncRNAs. The expression of thrombomodulin in endothelial cells was quantified in vascular tissue samples. Differences in the lncRNA expression profiles between the thrombotic samples of the PMMA group and ES-PMMA group were assessed by base-to-base alignment in the intergenic regions of genomes. The lncRNA-miRNA-mRNA competitive endogenous RNA (ceRNA) network was established in light of ceRNA theory. Thrombosis was observed in the PMMA group and ES-PMMA group. RESULTS: The thrombotic weight was 0.00706 ± 0.00136 g/cm in the PMMA group and 0.00551 ± 0.00115 g/cm in the ES-PMMA group. Quantitative real-time polymerase chain reaction (RT-q-CR) and Western blotting revealed that the expression of CD40, which can regulate thrombosis in vascular endothelial cells, was significantly lower in the ES-PMMA group than in the PMMA group. High-throughput sequencing was used to identify 111 lncRNAs with lower expression in the ES-PMMA group than in the PMMA group. Through bioinformatics investigation, lncRNA MSTRG22719.16/ocu-miR-326-5p/CD40 binding sites were selected. Fluorescent in situ RNA hybridization (FISH) was performed to verify the lower expression of lncRNA MSTRG.22719.16 in vascular tissues from the ES-PMMA group. A dual-luciferase reporter gene assay was applied to verify that ocu-miR-326-5p binds the CD40 3'-UTR and targets lncRNA MSTRG.22719.16. CONCLUSION: Compared with PMMA bone cement, ES-PMMA bone cement can reduce thrombosis through the lncRNA MSTRG.22719.16/ocu-miR-326-5p/CD40 axis.

Polymethylmethacrylate-induced foreign body reaction presenting as bilateral parotid lesions: A case report of dermal filler adverse reaction diagnosed on fine needle aspiration.

BACKGROUND: Dermal filler injections are being increasingly used as a non-surgical option for facial cosmetic procedures. However, their use has been implicated in multiple adverse events including immediate, early onset, and late onset complications. AIM: We present a case of dermal filler-induced foreign body reaction presenting as bilateral parotid lesions and diagnosed using fine needle aspiration. CONCLUSION: This case elucidate the risk of delayed adverse events in patients with dermal filler injections and stresses the importance of awareness by patients and providers for such events.

Early warm compress treatment can promote recanalization of vascular embolisms and reduce tissue necrosis after polymethyl methacrylate injection.

Injection of fillers for soft tissue augmentation can lead to a variety of complications, among which vascular occlusion caused by intravascular injection of filler will induce severe or permanent damage. The treatment strategies for intravascular embolization caused by injection include warm compress application, but the exact beneficial effects of this therapy have not been confirmed. The purpose of this study is to construct an intravascular injection embolism model and observe the effectiveness of warm and cold compress through a randomized, controlled trial. Thirty rabbit's sixty ears were randomly divided into warm compress group, cold compress group, and control group. Polymethyl methacrylate (PMMA) was slowly injected into the central ear artery (CEA) to cause vascular embolism. Warm compress and cold compress treatment were performed respectively. The vascular recanalization and other related indexes were observed at 30 min, 1 day, and 7 days after injection, and the tissue necrosis was analyzed at 7 days. In the early stage of vascular embolization, warm compress can immediately promote vascular dilatation, blood circulation and partial blood flow recovery. One day after intravascular injection, warm compress can reduce intravascular embolization and reduce the incidence of tissue necrosis. At 7 days after intravascular injection, the vessels in the cold compress and control groups were still embolized while the percentage of recanalization in the warm compress group was 47.4% (P < 0.000). Early-stage warm compress after intravascular PMMA injection is conducive to recanalization of vascular embolization and reducing tissue necrosis.

Polymethylmethacrylate Microspheres are Immunologically Inert in Mouse Tissues.

Nowadays, aesthetic concerns have gained attention, especially by patients looking for a less invasive alternative to minor facial corrections. Polymethylmethacrylate (PMMA) is widely used as a soft tissue filler; the demand for this polymer has increased, and along with it, there are some reports of adverse reactions. Such adverse reactions stem from consequences of immune and inflammatory reactions to PMMA. Some animal models have been used to unravel the causes of these reactions, among other factors involving the management of PMMA. The aim of this study was to determine the immunogenic profile of PMMA implantation in different anatomical planes of mice, over up to 360 experimental days. In this study, BALB/c mice were divided into 30 groups for immune evaluation of the interaction between the organism and the polymer; 2% PMMA was implanted subcutaneously, 10% intramuscularly and 30% in periosteal juxtaposition and followed during five experimental days (7, 30, 90, 180 and 360 days after implantation-DAI). Pro- and anti-inflammatory cytokines (IL-2, IL-4, IL-6, IFN-gamma, TNF, IL-17A, IL-10 and TGF-beta) were quantified in all experimental days. There was no statistical difference between the groups analyzed considering the evaluated parameters. Therefore, at all implanted depths, PMMA behaved inertly in a murine model.No Level Assigned This journal requires that authors assign a level of evidence to each submission to which Evidence-Based Medicine rankings are applicable. This excludes Review Articles, Book Reviews, and manuscripts that concern Basic Science, Animal Studies, Cadaver Studies, and Experimental Studies. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .

A Prospective 2-Year Extension Study to Evaluate the Safety and Effectiveness of PMMA-collagen Gel for the Correction of Mid-Facial Volume Loss.

BACKGROUND: The safety and efficacy of polymethylmethacrylate (PMMA)-collagen gel for long-lasting correction of mid-face volume deficit was established for 12 months. OBJECTIVE: To determine the long-term safety, efficacy, and durability of PMMA-collagen gel for midface volume restoration at 24 and 36 months. METHODS: This prospective, single-center, 2-year extension study enrolled 22 patients treated with PMMA-collagen gel in the initial study. The primary endpoint was a 2-point improvement from baseline at 24 and 36 months on the Midface Volume Deficit Scale (MFVDS). Secondary endpoints included improvement from baseline to 24 and 36 months on the Physician- and Subject-rated Global Aesthetic Improvement Scales (PGAIS and SGAIS, respectively). RESULTS: The primary endpoint was met in 100% of the subjects, and the improvement in MFVDS score from baseline was significant at both 24 and 36 months (P<0.0001). PGAIS scores were rated as at least improved in 100% of subjects at 24 months and in 95% at 36 months. Similarly, 91% of participants at 24 months and 95% at 36 months reported enhanced appearance as measured by SGAIS. No additional adverse events were reported over the extension study. CONCLUSION: PMMA-collagen gel is a safe, effective, and durable treatment for restoring mid-face volume. J Drugs Dermatol. 2023;21(1): doi:10.36849/JDD.6966.

Surgical Management of Polymethylmethacrylate-Collagen Gel Complications in the Lower Eyelid: A Case Series.

BACKGROUND: As nonsurgical rejuvenation with fillers continues to grow in popularity, patients are increasingly interested in more durable results. Polymethylmethacrylate (PMMA)-collagen gel is unique among fillers in that the PMMA microspheres are not completely absorbed and phagocytosed by the body. This durability coupled with the biophysical properties of PMMA makes it a poor choice for periorbital rejuvenation, an unforgiving and highly complex anatomic area. METHODS: Between 2011 and 2018, 14 patients with PMMA granulomas in various facial areas self-referred to the senior author's practice. Of these patients, 11 were managed nonsurgically; however, all 3 patients who presented with granulomas in the infraorbital area required surgery to remove the filler and restore a natural aesthetic. RESULTS: The 3 patients with significant swelling and PMMA filler nodules in the infraorbital area with unacceptable cosmetic appearance were females between the ages of 50 and 55 years. Nonsurgical protocols were unsuccessful, and surgical removal was required. All subjects have been followed for a minimum of 2 years with no immediate- or long-term postoperative complications secondary to PMMA removal. Patients remain satisfied with the outcome of the surgery. CONCLUSIONS: Despite the evidence that the periorbital area is prone to adverse events when injected with particulate fillers, misguided enthusiasm for PMMA-collagen gel as a durable treatment continues to lead to unnecessary and severe complications in patients. The case studies presented here highlight that this product should not be introduced into the periorbital area. We also describe a surgical treatment approach for its removal if complications arise.

Does Calcium Phosphate Cement Kyphoplasty Cause Intervertebral Disk Degeneration in Adolescents?

OBJECTIVE: Balloon kyphoplasty with polymethylmethacrylate (PMMA) represents the standard procedure for the treatment of thoracic and lumbar type A compression fractures. However, an increased degeneration in adjacent intervertebral disks following PMMA kyphoplasty has been demonstrated in elderly patients. Calcium phosphate cement (CPC) appears to be superior to PMMA for the intravertebral stabilization in younger patients. It remains unkown whether CPC kyphoplasty causes degeneration of adjacent disks in adolescents. DESIGN: Seven adolescents with thoracolumbar spine fractures underwent kyphoplasty at a mean age of 14.5 years (range 10-18). At a mean follow-up of 3.7 years (range 1 to 4.8) postoperatively, 3.0 Tesla magnetic resonance imaging (MRI) of the spine was performed to assess intervertebral disk degeneration by quantitative T2 relaxation maps and subjective ratings using modified Pfirrmann scores. A total of 56 intervertebral disks was analyzed. Initial computed tomography (CT) examinations served as basis to assess the severity of adjacent endplate injuries in terms of articular step-offs. RESULTS: Initial imaging detected 18 thoracolumbar vertebral body fractures of which 9 were treated with CPC kyphoplasty. Quantitative follow-up MRI revealed signs of degeneration in 10 (17.9%) of the examined 56 intervertebral disks, 7 of them adjacent to a previously fractured vertebral body. Signs of disk degeneration were significantly higher in caudal endplates with articular step-offs larger than 5 mm compared to fractured vertebral bodies without endplate step-offs. CONCLUSIONS: Quantitative MRI follow-ups did not suggest CPC-related intervertebral disk degradations following thoracolumbar kyphoplasty in adolescents, but indicated disk alterations correlating to adjacent endplate fracture severity.

[Research progress on health hazards and occupational protection of prolymethylmethacrylate bone cement in the operating room].

There are many occupational risk factors in operating room work. Polymethyl methacrylate (PMMA) , as a kind of common bone filling and repairing material, is widely used in the fixation of artificial joints, oral braces and orthopedic prosthesis. However, PMMA will release methyl methacrylate (MMA) monomer when it is implanted into human tissues and polymerized to harden, which is toxic to the body. This paper analyzes harmful factors in using PMMA bone cement, and then explores corresponding occupational protection knowledge, in order to reduce the occurrence of occupational hazards related to PMMA bone cement and enhance the self-protection ability of the operation room medical staff.

Clinical commentary about foreign body complications over 20 years after polymethyl-methacrylate face implants and control of late sequelae with Polynucleotides Highly Purified Technology (PN-HPT® ).

INTRODUCTION: Mainly in the past, foreign body complications, including granuloma, were pretty frequent after semi-permanent polymethyl-methacrylate (PMMA) implants. RESULTS: The authors describe a twenty-year history of recurring post-PMMA complications interspersed by long uneventful years, with acute edematous side effects evolving into unpleasant skin dystrophia with persistent cutis laxa. The case report also discusses a simple clinical algorithm to discriminate among foreign body complications with particular attention to granulomas. CONCLUSIONS: The authors conclude by discussing the benefits of the anti-dystrophic treatment with natural-origin remodeling PN-HPT® (Polynucleotides Highly Purified Technology).

[Manual addition of antibiotics to industrial bone cement mixes : Investigations of the dry mix in the cement cartridge during manual admixture to polymer-active substance mixtures]. / Manuelle Beimischung von Antibiotika zu industriellen Knochenzementmischungen : Untersuchungen zur Trockenmischung in der Zementkartusche bei der manuellen Beimischung zu Polymer-Wirkstoff-Gemischen.

BACKGROUND: Periprosthetic infection (PPI) is a rare but serious complication. An elementary component of the therapy of PPI is the use of bone cement with the addition of antibiotics. For targeted therapy, manual mixing of antibiotics with industrially produced bone cement mixtures is often necessary. Possible problems resulting from manual mixing have not been described sufficiently so far. OBJECTIVES: Therefore, the aim of the present study was to describe the influence of the additional homogenisation by dry mixing of a polymer-active substance mixture on the quality of manually added cement. MATERIAL AND METHODS: In the laboratory-based study, four cement samples were prepared using different methods for manual addition and homogenisation of antibiotics (vancomycin). The reference control was Copal® G + V (Heraeus Medical GmbH, Wehrheim, Germany), to which the vancomycin (V) had already been industrially added. The samples were then examined for mechanical, microbiological and microscopic parameters. RESULTS: In the mechanical and microbiological results, no statistically significant differences were found between the manually added mixtures and the reference. After dry mixing of the polymer powder, the inner surface of the mixing cartridges used showed signs of scratching in the microscopic examination and showed indications of abrasion during mixing. CONCLUSION: The manual addition of antibiotics to industrially produced bone cement should be reserved for selected indications if the bone cement mixtures produced by industry are not sufficient.

Research progress on health hazards and occupational protection of prolymethylmethacrylate bone cement in the operating room / 中华劳动卫生职业病杂志

There are many occupational risk factors in operating room work. Polymethyl methacrylate (PMMA) , as a kind of common bone filling and repairing material, is widely used in the fixation of artificial joints, oral braces and orthopedic prosthesis. However, PMMA will release methyl methacrylate (MMA) monomer when it is implanted into human tissues and polymerized to harden, which is toxic to the body. This paper analyzes harmful factors in using PMMA bone cement, and then explores corresponding occupational protection knowledge, in order to reduce the occurrence of occupational hazards related to PMMA bone cement and enhance the self-protection ability of the operation room medical staff.

Long-Term Outcomes of Peripheral Pulmonary Cement Embolism in Patients with Polymethylmethacrylate Augmentation: A Case Series with a Minimum Follow-Up of Five Years.

BACKGROUND: Pulmonary cement embolism (PCE) is a rare but lethal complication. However, few long-term follow-up studies have investigated PCE after polymethylmethacrylate augmentation. This study aimed to investigate both the clinical and imaging outcomes of patients with PCE during a follow-up period of at least 5 years. METHODS: A total of 1460 patients were initially included in this retrospective study. After exclusion, the clinical and imaging data were analyzed for selected patients, including the augmented level, location and length of the PCE, symptoms, therapy, migration and disintegration of the embolism, foreign body reaction, and status at follow-up. RESULTS: Twelve female patients (age range, 56-88 years) with PCE and more than 5 years of follow-up (range, 5-13 years) were eventually included. All emboli were found in subsegment pulmonary arteries and were classified as peripheral PCE. Although 2 patients experienced transient symptoms after surgery, the majority of patients (84.6%) were asymptomatic during follow-up. No other reported emboli were observed during the follow-up period. The imaging data showed that the cement embolus could remain in the initial position throughout the long-term follow-up. In terms of the length of the PCE, there was no statistically significant difference between the values post-operation and at the last follow-up time (P > 0.05). CONCLUSIONS: Patients with peripheral PCE do not develop known late complications. Moreover, polymethylmethacrylate can remain stable and inert in the pulmonary vasculature over the long term. Routine prophylactic anticoagulation may not be necessary for patients with peripheral PCE during follow-up.

Safety and Efficacy of Dermal Fillers in Patients With Connective Tissue Disease: A Review.

BACKGROUND: Dermal fillers such as hyaluronic acid, poly-l-lactic acid, and polymethyl-methacrylate are often used to treat cutaneous defects such as lipoatrophy. However, concern exists regarding their use in patients with a connective tissue disease (CTD) because of a theoretical risk of disease reactivation or exacerbation. Evidence regarding their use in patients with CTD also remains limited. OBJECTIVE: This review intends to summarize and evaluate the available literature regarding the use of dermal fillers in patients with CTD. MATERIALS AND METHODS: A literature search until May 2020 was conducted through PubMed, Ovid MEDLINE, and Ovid Embase to identify articles discussing the treatment of cutaneous defects secondary to CTD. Articles discussing the use of autologous fat transfer alone were excluded. RESULTS: Twenty-three articles were reviewed. The amount of available evidence varies between the type of CTD and type of filler with morphea having the most published evidence out of the CTDs discussed and hyaluronic acid having the most published evidence out of the fillers discussed. Most studies demonstrated positive results with no report of disease reactivation or exacerbation. CONCLUSION: Despite limited available evidence, dermal fillers seem to be safe as an adjunctive treatment for cutaneous defects in patients with CTD.

Case reports of hypercalcemia and chronic renal disease due to cosmetic injections of polymethylmethacrylate (PMMA) / Relatos de casos de hipercalcemia e doença renal crônica devidas a injeções de polimetilmetacrilato (PMMA) por razões estéticas

Abstract Cosmetic injections of fillers are common plastic surgery procedures worldwide. Polymethylmethacrylate (PMMA) is a filler approved only for minimally invasive procedures in facial tissue and is among the most frequently used injectable substances for cosmetic purposes. Injection of a large volume of PMMA may lead to the development of severe hypercalcemia and chronic kidney damage in a probably underestimated frequency. In such cases, hypercalcemia develops due to a granulomatous foreign body reaction with extrarenal production of calcitriol. In the present report, we describe the cases of two patients who received injections of large volumes of PMMA and developed severe hypercalcemia and advanced chronic kidney disease. These reports highlight the importance of adhering to regulations regarding the use of PMMA and properly informing patients of the possibility of complications before undertaking such procedures.

Resumo Injeções de preenchimento de caráter estético são procedimentos comuns em cirurgia plástica em todo o mundo. O polimetilmetacrilato (PMMA) é um material de preenchimento aprovado apenas para procedimentos minimamente invasivos no tecido facial, e está entre as substâncias injetáveis mais frequentemente usadas para fins estéticos. A injeção de um grande volume de PMMA pode levar ao desenvolvimento de hipercalcemia grave e lesão renal crônica em uma frequência provavelmente subestimada. Nesses casos, a hipercalcemia se desenvolve devido a uma reação granulomatosa de corpo estranho, secundária à produção extrarenal de calcitriol. No presente artigo, descrevemos os casos de dois pacientes que receberam injeções de grandes volumes de PMMA e desenvolveram hipercalcemia grave e doença renal crônica avançada. Esses relatos destacam a importância de seguir as regulamentações sobre o uso do PMMA e informar adequadamente os pacientes sobre a possibilidade de complicações antes de realizar tais procedimentos.